Features

Easy to handle
Usable for process application
Limit of detection: 0.15 % air-saturation, 15 ppb dissolved oxygen
Measuring range: 0 - 100 % oxygen, 0 - 45 mg/L
Very robust sensor with excellent long-term stability
Sterilizable by H2O2, ethanol, gamma irradiation, EtO2
No self-consumption of oxygen
Signal independent on flow velocity
Insensible towards electrical interference and magnetic fields
Dry gases applicable
Robust sensor body

This dipping probe oxygen mini sensor, consists of a polymer optical fiber (POF) with a polished distal tip which is coated with a planar oxygen-sensitive foil. The end of the polymer optical fiber is covered with a high-grade steel tube, to protect both the sensor material and the POF. The cable has an outer diameter of 2.8 mm. The inner diameter of the POF is 2.0 mm. The steel tube has an outer diameter of 4 mm. Usually, the fiber is coated with an optical isolated sensor material in order to exclude ambient light from the fiber tip and to increase chemical resistance especially against oily samples as well as to reduce bio-fouling on the sensor membrane. This type of oxygen sensor has an excellent long-term stability.

Data

This is product data for the selected system:

Measurement range	0 - 475 % air saturation
Limit of detection	+/- 0.15 % air saturation
Resolution	+/- 0.475 % air saturation
Accuracy	+/- 0.5 % air saturation
Response Time	< 30 sec
Precision	+/- 0.5 % air saturation
Cable length	5 m
Sensor length	200 mm
Sensor diameter	4 mm (OD)