Add-on Shuttle Box system

Shuttle tank for testing aquatic animal behavior in different controlled environments.

Use our tank to test the behavior of animals moving freely between zones of different water temperature, oxygen, salinity, turbidity, pollutants etc. It is also possible to set up a combination of different environmental effects, e.g., simultaneous exposure to increased temperatures and oxygen depletion.

The Shuttle tank is an 8-figure shaped tank in which an animal can shuttle between two compartments via a short passage. Water is slowly rotating inside each sub compartment preventing any mixing of water between the two.

This buffer tank is made use with a Loligo^® shuttle tank and has the volume and ports needed for feeding the tank with a continuous flow of water by gravity and regulating water quality (temperature, oxygen, pH/CO2, salinity).

Features

• Compact USB 3.1 camera
• 5 MP CMOS sensor
• USB Type-C connector
• For use with IR lighting

This high value for money, compact, and industrial German C-mount camera with SuperSpeed USB 5 Gbps is equipped with the versatile 1/2.5" 5.04 MP CMOS sensor ON Semiconductor and USB Type-C connector. It is ideally suited for microscopy and lab applications requiring high image resolution, and for applications with poor or changing lighting conditions. The camera comes without IR filter making it ideal for use with our IR lighting panels for applications requiring back illumination, e.g., shuttle tanks.

Use this camera with our free Video Recorder software to record and edit videos.

Included with the camera:

• USB cable (3 m)
• Tripod adapter plate with 6.3 mm (¼") camera thread
• Wall bracket mount with 6.3 mm (¼") camera thread

FEATURES

• Professional grade 6 mm monofocal lens
• For use with C-mount cameras with 1/1.8” sensors
• Various focal lengths for different applications

This high-quality, 6 mm monofocal lens can be used with C-mount cameras. Optimal camera sensor size is 1/1.8”. The lens has a mechanical adjuster for focus and for aperture. Several different focal lengths are available to meet your specific application.

German-made submersible Eheim pump (centrifugal) for use in sea and fresh water.

Tube clamp for <20 mm tubes.

FEATURES

• Flexible (dim) PVC tubing
• Use for toxic-free applications

This toxic-free tubing is made from very flexible PVC and has a translucent appearance. The tubing is ideal for use in our any of our systems to connect pumps, chambers, fittings etc. The translucent characteristic makes it easy to monitor for air bubbles or other unwanted elements inside the tubing.

This SET comes with a pH 3310 instrument, serial interface, mobile case, SenTix 41 pH probe, and three buffer solutions (pH 4, pH 7, and KaCl).

Use this industrial grade 4-fold power strip for software-driven control and monitoring of equipment via LAN/Ethernet or Bluetooth.

Connect pumps, solenoid valves, or stirrers to one of four independent electrical sockets switching at zero current (ZCS), e.g., for automated respirometry, water quality regulation, shuttle box experiments etc.

Electrical parameters like input voltage and power consumption (in Amps) for each relay, can be monitored and logged in Loligo^® software for diagnostics of connected appliances.

FEATURES

• Regulate temperature levels in water tanks
• Sturdy and submersible water pump
• Heating coil for effective temperature regulation

This accessory set is used for regulation of water temperature. The sturdy submersible Eheim pump can be switched on/off using our PowerX4 Bluetooth/ethernet power strip. When activated, the Eheim pump forces water through the tubing and stainless-steel coil. Immerse the coil in chilled or heated water to change ambient water temperature.