Add-on Shuttle Box system
Customs tariff #
- Add-on system = Add an additional shuttle tank to your core system
- Includes everything needed to control an additional shuttle tank in ShuttleSoft 3
This is an add-on system for the core Shuttle Box system. The add-on system will upgrade your core shuttle box system with everything needed to run an additional shuttle tank from inside ShuttleSoft 3.
Note that ShuttleSoft 3 can run up to three shuttle tanks from a single PC. If you want to run three shuttle tanks, simply add 2 x Shuttle Box system (Add-on) to your Shuttle Box system (Core).
For Witrox users
This is product data for the selected system:
These products are included in the system:
Shuttle tank for testing aquatic animal behavior in different controlled environments.
Use our tank to test the behavior of animals moving freely between zones of different water temperature, oxygen, salinity, turbidity, pollutants etc. It is also possible to set up a combination of different environmental effects, e.g., simultaneous exposure to increased temperatures and oxygen depletion.
The Shuttle tank is an 8-figure shaped tank in which an animal can shuttle between two compartments via a short passage. Water is slowly rotating inside each sub compartment preventing any mixing of water between the two.
This buffer tank is made use with a Loligo® shuttle tank and has the volume and ports needed for feeding the tank with a continuous flow of water by gravity and regulating water quality (temperature, oxygen, pH/CO2, salinity).
- Compact USB 3.1 camera
- 5 MP CMOS sensor
- USB Type-C connector
- For use with IR lighting
This high value for money, compact, and industrial German C-mount camera with SuperSpeed USB 5 Gbps is equipped with the versatile 1/2.5" 5.04 MP CMOS sensor ON Semiconductor and USB Type-C connector. It is ideally suited for microscopy and lab applications requiring high image resolution, and for applications with poor or changing lighting conditions. The camera comes without IR filter making it ideal for use with our IR lighting panels for applications requiring back illumination, e.g. shuttle tanks.
Included with the camera:
- USB cable (3 m)
- Tripod adapter
- Wall bracket mount
High quality lens for megapixel cameras.
German-made submersible Eheim pump (centrifugal) for use in sea and fresh water.
Tube clamp for <20 mm tubes.
Flexible (dim) PVC tubing for technical toxic-free applications. These tubes are very flexible.
This SET comes with a pH 3310 instrument, serial interface, mobile case, SenTix 41 pH probe, and three buffer solutions (pH 4, pH 7, and KaCl).
Use this industrial grade 4-fold power strip for software-driven control and monitoring of equipment via LAN/Ethernet or Bluetooth.
Connect pumps, solenoid valves, or stirrers to one of four independent electrical sockets switching at zero current (ZCS), e.g., for automated respirometry, water quality regulation, shuttle box experiments etc.
Electrical parameters like input voltage and power consumption (in Amps) for each relay, can be monitored and logged in Loligo® software for diagnostics of connected appliances.
This accessory set for our DAQ and REG instruments, is used for control of water temperature by passing water through a steel coil and back via the tubing, in order to heat or chill the water.
These products are optional for the selected system:
These files can help you with the selected system: